What are the possible reasons for hydraulic sausage filler machine failing to complete the filling function?

• One reason could be a blocked vacuum tube in the sausage enema machine. Simply remove the vacuum tube and clean it to resolve the problem.
• Another reason may be a clogged vacuum pump filter. The solution is to either clean or replace the vacuum pump filter.
• If the machine is filling thick materials, it may be due to the absence of a reversing arm. Check if the reversing arm is present and install it as necessary.
• A missing scraper could also be the problem. Verify if the scraper is installed, and if it isn’t, add it promptly.
• Meat that is excessively cold or hard could be preventing the process. If the machine has a mechanical switch, adjust the temperature to be above -5℃. Without a mechanical switch, refrigerate the meat between 0-3 degrees and make sure it’s soft after ten minutes.
• Pump blades may have been inserted incorrectly. Adjust them to align the recess with the rotor’s center.
• Not enough lubrication in the pump could be another cause. Lubricate the entire pump to ensure smooth operation.